|
|
| |
| Home > Signal Processors |
|
Freq-Out
Automatic Feedback Eliminator
The Freq-Out is basically a very sophisticated filter set. It
includes sixteen notch filters configured for 1/12 octave performance
in normal operation. The filters operate using "seek &
destroy" algorithms to find, lock in on, and reduce offending
frequencies. The reduction of the offending is minimal, using
only enough attenuation to contain the feedback without affecting
tonal quality. The attenuation happens very quickly and is difficult
to even notice that is taking place.
- 16 available feedback filters (eight dynamic, eight static)
- 1/12 octave filter bandwidth
- 30 dB maximum filter depth
- lnput sensitivity selectable between -10 dBV and +4 dBV (+4 dBu and +18 dBu)
- Output level selectable between -10 dBV and +4 dBV (+4 dBu and +18 dBu)
- Signal presence and clip LEDs
- Four filter configuration presets
- System bypass control
- "Wide" control (increases filter width and depth)
- "Panic" filters to control sudden, extreme feedback
- LED indicators for active notch filter
- CE approved
|
Download
Owners Manual (PDF - 1.63 mb)
Download
Complete Spec Sheet (PDF - 130 kb)
Large
front view
Pro
Audio Review (PDF - 416 kb) |
| Specifications |
| Frequency
Response |
±0.5
dB 20 Hz to 20 kHz |
| THD + N |
0.005% |
| S/N Ratio |
105 dB |
| Converters |
24-bit |
| Agency Approvals |
UL, CUL, CE |
| Operating Voltages |
120/240 VAC |
| Dimensions |
1.75" H x
19" W x 9" D |
| Weight |
7 lbs. |
|
| Previous
Page |
| |
|
|
