|
|
| |
| Home > Power Amps |
|
ICA™ 800V
800 Watt Industrial Contractor Amplifier
The ICA amplifiers are available as "V" versions.
The ICA "V" Series is designed specifically for 70
Volt and 100 Volt (export) distributed audio systems, without
the need for a transformer.
- These amplifiers are built from rugged, high-quality components
and feature comprehensive protection circuits to protect
your amplifier from those “real world” occurrences.
- Load Fault Correction™ instantaneously reduces channel
gain to allow the amplifier to operate at a safe level into
an abnormal load.
- The LFC circuit senses the short circuit as an abnormal
load condition and reduces the channel gain to a safe level
for the load.
- Fade-in Protection - The amplifier goes into protect mode
and leaves the speaker load disconnected until the amplifier
determines that the operating status is normal
- DC Voltage Protection detects DC voltage or subsonic
signals at its output terminals.
- The input connector accepts balanced and unbalanced audio
signals.
- Sequential Turn-On Connector
|
Download
Owners Manual (PDF - 5.44 mb)
Download
Complete Spec Sheet (PDF - 582 kb)
Large
back view (ICA 600 shown) |
| Specifications |
| Frequency
Response |
10
Hz to 25 kHz +0/-3 dB |
| THD + N |
ICA 800V-70: <0.15%
ICA 800V-100: <0.1% |
| S/N Ratio |
>-108 dB |
| Output Power |
ICA 400V-70: 85 Volts
ICA 400V-100: 110 Volts |
| Agency Approvals
|
UL, CUL, CE |
| Operating Voltages |
120/240 VAC |
| Dimensions |
5.25" H x
19" W x 16.4" D |
| Weight |
45 lbs. |
|
| Previous
Page |
| |
|
|
