|
|
| |
| Home > Power Amps |
|
ICA™ 600
600 Watt Industrial Contractor Amplifier
- These amplifiers are built from rugged, high-quality components
and feature comprehensive protection circuits to protect
your amplifier from those “real world” occurrences.
- Load Fault Correction™ instantaneously reduces channel
gain to allow the amplifier to operate at a safe level into
an abnormal load.
- The LFC circuit senses the short circuit as an abnormal
load condition and reduces the channel gain to a safe level
for the load.
- Fade-in Protection - The amplifier goes into protect mode
and leaves the speaker load disconnected until the amplifier
determines that the operating status is normal
- DC Voltage Protection detects DC voltage or subsonic signals
at its output terminals.
- The input connector accepts balanced and unbalanced audio
signals.
- Sequential Turn-On Connector
|
Download
Owners Manual (PDF - 5.44 mb)
Download
Complete Spec Sheet (PDF - 582 kb)
Large
back view |
| Specifications |
| Frequency
Response |
10
Hz to 25 kHz +0/-3 dB |
| THD + N |
<.01% |
| S/N Ratio |
>-108 dB |
| Output Power |
300 Watts/ch 4 Ohm
200 Watts/ch 8 Ohm |
| Agency Approvals
|
UL, CUL, CE |
| Operating Voltages |
120/240 VAC |
| Dimensions |
3.48" H x
19" W x 16.4" D |
| Weight |
30.2 lbs. |
|
| Previous
Page |
| |
|
|
